The TMC457-EVAL is designed to evaluate the TMC457-BC high-end motion controller in combination with an ARM7 processor and a TMC246B-PA stepper motor driver or with a Piezo LEGS™ piezo motor from PiezoMotor™. All you need to get started is a power supply and Trinamic's free and easy to use TMCL-IDE. This graphical user interface allows quick setup and supports the use of commands in direct mode, monitors real-time behavior visualized in graphs, and logs and stores data. All settings can simply be exported for your own firmware project.More about the TMCL-IDESpecial Featuresmicrostep tableStallGuard™
| Motor Supply | 12…34V |
|---|---|
| Phase Current, RMS | 1.0A |
| Microsteps | 1…2048 |
| RS232 | Yes |
| USB | Yes |
| microstep table | Yes |
| StallGuard™ | Yes |
| StallGuard™（无传感器失速检测和机械负载测量） | Yes |
| 产品状态 | 量产 |
TMC457-EVAL设计用于评估TMC457-BC高端运动控制器与ARM7处理器和TMC246B-PA步进电机驱动器或压电腿的组合™ 压电马达™.所有你需要开始的是一个电源和Trinamic的免费和易于使用的TMCL-IDE。此图形用户界面允许快速设置，并支持在直接模式下使用命令，监视图形中可视化的实时行为，以及记录和存储数据。所有设置都可以简单地导出为您自己的固件项目。更多关于TMCL IDE特殊功能Microstep tableStallGuard™（无传感器失速检测和机械负载测量）
| Motor Supply | 12…34V |
| Phase Current, RMS | 1.0A |
| Microsteps | 1…2048 |
| RS232 | Yes |
| USB | Yes |
| microstep table | Yes |
| StallGuard™（无传感器失速检测和机械负载测量） | Yes |
| 产品状态 | 量产 |