For a quick evaluation of one of the Trinamic Breakout Boards (BOBs) without commiting to a processor, the USB-2-SD translates TMCL-IDE commands into Step/Direction pulses. Simply connect it directly via the USB type A compatible PCB footprint to your computer to communicate with the breakout board of your choice via S/D.Featuring Trinamic's TMC4330A-LA fully integrated stepper motor servo controller, the USB-2-SD allows for the flexible acceleration profiles of linear ramping, SixPoint™ ramping, and S-shaped ramping. In addition, an incremental encoder (5V signal level) can be connected to the USB-2-SD to read back motor or joint position.The simple but powerful Step/Dir signal generator can be controlled via Trinamic’s TMCL protocol and commands, and is fully supported by the TMCL-IDE graphical user interface.
| Axes | 1 |
|---|---|
| Motor Supply | — |
| Phase Current, RMS | — |
| Microsteps | — |
| Step/Dir | Yes |
| USB | Yes |
| Width | 12mm |
| Length | 42mm |
| Height | 5mm |
| 产品状态 | 量产 |
为了在不提交给处理器的情况下快速评估Trinamic转接板（BOB），USB-2-SD将TMCL-IDE命令转换为步进/方向脉冲。只需通过USB type A兼容PCB封装直接连接到您的计算机，通过S/D与您选择的转接板进行通信。凭借Trinamic的TMC4330A-LA全集成步进电机伺服控制器，USB-2-SD允许线性斜坡的灵活加速曲线，六点™ 斜坡和S形斜坡。此外，可将增量编码器（5V信号电平）连接至USB-2-SD以读回电机或接头位置简单但功能强大的Step/Dir信号发生器可以通过Trinamic的TMCL协议和命令进行控制，并且完全受TMCL-IDE图形用户界面的支持。
| Axes | 1 |
| Motor Supply | |
| Phase Current, RMS | |
| Microsteps | |
| Step/Dir | Yes |
| USB | Yes |
| Width | 12mm |
| Length | 42mm |
| Height | 5mm |
| 产品状态 | 量产 |