The USB-2-485 device is a low-cost interface converter that supplies a simple-to-use RS485 interface to a PC with an USB port. The USB-2-485 device can be used erverywhere where an RS485 interface is needed, since it does not require special software. It can be operated with most simple terminal programes supporting the serial interface. The software supplied with this product can be used with every version of the Windows operating system that supports USB (Windows 98, Windows ME, Windows 2000, Windows XP). The USB-2-485 device can be connected to USB 1.1 or USB 2.0 hosts and supports the full bitrate of 12MBit/s. It is fully powered by the bus, so no extra power supply is needed.
| Axes | — |
|---|---|
| Motor Supply | — |
| Phase Current, RMS | — |
| Microsteps | — |
| RS485 | Yes |
| USB | Yes |
| Width | 33mm |
| Length | 68mm |
| Height | 17mm |
| 产品状态 | 量产 |
USB-2-485设备是一种低成本的接口转换器，它为带有USB端口的PC提供一个简单易用的RS485接口。USB-2-485设备可以在任何需要RS485接口的地方使用，因为它不需要特殊的软件。它可以用大多数支持串行接口的简单终端程序来操作。随本产品提供的软件可用于支持USB的所有版本的Windows操作系统（Windows 98、Windows ME、Windows 2000、Windows XP）。USB-2-485设备可以连接到USB 1.1或USB 2.0主机，支持12MBit/s的全比特率，完全由总线供电，因此不需要额外的电源。
| Axes | |
| Motor Supply | |
| Phase Current, RMS | |
| Microsteps | |
| RS485 | Yes |
| USB | Yes |
| Width | 33mm |
| Length | 68mm |
| Height | 17mm |
| 产品状态 | 量产 |